South Africa 30t/h limestone grinding plants
- Material : Limestone
- Feeding Size : <25mm
- Output Size : 200 mesh
- Capacity : 30 t / h
- Configuration : jaw crusher + bucket elevator + vibrating feeder + two MTW175 European Tech. grinding mills
- Customer feedback
- The customer has a large local quarry with large milling requirement. At the beginning, he purchased two European tech. grinding mills. Now he is very satisfied with them which meet his requirements in capacity and environmental protection. Recently, he prepare to purchase additional two mills.
- CRUSHING PROCESS
The limestone bulk material is crushed into a fineness (15mm-50mm) into the mill.
After the broken limestone pieces of material by the hoist to the silo, and then by the vibration feeder to its uniform quantitative into the mill grinding room for grinding.
After grinding the material by the separator for grading, unqualified powder was classified after the separator to return to the host to re-grinding.
4. Set the powder
Fineness of the powder with the air flow through the pipeline into the dust collector for separation and collection, the collection of finished powder from the discharge port by the conveyor to the finished silo, and then unified with a loaded tanker or automatic baler for packaging
- Necessary Equipment
- Related Case