South Korea 10t/h limestone mill machine
- Material : limestone
- Output Size : 100 mesh
- Capacity : 10t / h
- Configuration : 1.8x15m dryer + TGM130 mill
- CRUSHING PROCESS
-
1. Broken
The limestone bulk material is crushed into a fineness (15mm-50mm) into the mill.
2. milling
After the broken limestone pieces of material by the hoist to the silo, and then by the vibration feeder to its uniform quantitative into the mill grinding room for grinding.
3.Grading
After grinding the material by the separator for grading, unqualified powder was classified after the separator to return to the host to re-grinding.
4. Set the powder
Fineness of the powder with the air flow through the pipeline into the dust collector for separation and collection, the collection of finished powder from the discharge port by the conveyor to the finished silo, and then unified with a loaded tanker or automatic baler for packaging. - CUSTOMER FEEDBACK
- According to the actual situation of our site, kefid of engineers for us with the dryer and the impulse precipitator, dryer can dry moisture more than 8% of the materials into water for no more than 6% of the material, then enter TGM130mill for grinding can greatly improve the production efficiency;Pulse filter can effectively reduce dust leak on surrounding environment caused by pollution, greatly meet the requirement for environmental protection.Kefid, trusted you
- Necessary Equipment
- Related Case
-
