Micro Powder Mill
OUTPUT SIZE : 300-3000 mesh PRODUCTION CAPACITY : Up to 6000kg/Hour capacity depends on the size of fineness.
APPLICATIONS : me
- INTRODUCTION
- FEATURES
- TECHNICAL SPECIFICATIONS
MW series micro powder mill is a processing equipment for fine powder and super fine powder. It’s mainly used to grind non-flammable non-explosive non-mental materials with medium and low hardness temperature below 6% and Mohs hardness below 9 grade.
- INTRODUCTION
-
MW series micro powder mill is a processing equipment for fine powder and super fine powder. It’s mainly used to grind non-flammable non-explosive non-mental materials with medium and low hardness temperature below 6% and Mohs hardness below 9 grade.
- FEATURES
1.Low investment cost. With same fineness and motor power it invest less comparing with airflow mill stirring mill ball mill which is of low cost short recovery period and twice more production capacity.
2.High powder outlet ratio. With same product fineness and energy consumption capacity is 45% higher comparing with airflow mill and stirring mill.
3.Less loss of wearable parts long life span. All wearable parts are of high-quality abrasion resistant materials both at home and abroad which has longer life span than ordinary mill generally more than one year.
4.High security and reliability running safely and stably in the grinding cavity. Comparing with ordinary mill the super fine mill has advantages of no rolling draft no bolts. Thus there is no problem of weariness of drafts and other seal parts which can avoid bolts loosing and machine damage.
5.High fineness of final product. Final fineness can reach d97≤5μm in one time.
6.Environmental and less pollution. High efficient pulse dust removing device is adopted which can guarantee little dust pollution of the whole set of equipment. Muffler and silencer room are allocated which will reduce dust pollution and noise and meet the national environment protection standard and protect the surrounding environment.
- TECHNICAL SPECIFICATIONS
Item MW880 MW980 MW1080 MW1280 MW1680 Ring Diameter (mm) 800 930 1035 1300 1680 Ring number 3 3~4 3 4 4 Ring roll number(pcs) 21 29 28 32 44 Rotary speed of main shaft(t/min) 230-240 200~220 180-200 135-155 120-130 Feeding Size(mm) ≤20 ≤20 ≤20 ≤20 ≤20 Output size(μm/mesh) 5-47 5-47 5-47 5-47 100-9 Capacity(t/h) 0.4-4.5 0.6-6.5 0.7-7 1.5-12 3.8-30 Overall dimension(L×W×Hm) 13.9×4×6.2 14.7×4.8×7.2 18×4.6×8.6 14×9×10.25 26.3×7.5×11.9 Total power(Kw) 145-165 185-204 263 380-430 600-700