kefidsh@kefidgroup.com

Home>News>Product Knowledge

 

The precautions for later maintenance of cone crusher

Posted: 2019 12 12 Source: Kefid Shanghai Machinery Views: 319

1. The ore must be given in the middle of the distribution plate. It is not allowed to feed the ore directly into the crushing chamber. Because it is easy to overload the crusher and make the liner wear uneven.

2. The capacity of the crusher.

3. Replace the rolling mortar wall.

4. Replacement of cone broken wall.

5. Gear meshing.

6. Bowl bearing and sealing device.

HPT-2.jpg

7. The cylindrical bushing and the frame are the third transitional cooperation. In order to prevent the rotation of the bushing, a zinc alloy is injected into the upper groove of the bushing. When replacing the new bushing, it should be prepared according to the actual size of the frame. Because after a long period of work, the cooperation relationship will inevitably change. Excessive clearance will cause the bushing to crack.

8. Conical bushing, spring inspection.

9. The exposed rotating part of the machine should be covered with a protective cover.

ONLINE MESSAGE

such as: Output size 0-10, 10-15, 15-20mm