Posted: 2020 08 06 Source: Kefid Shanghai Machinery Views: 308
Impact crusher also belongs to the impact crushing category. The finished product has a good grain shape, and a certain profit can be achieved by adjusting the discharge size and selecting the appropriate specifications. But the impact crusher is not a professional sand making machine after all. There are at least the following three defects in sand making with impact crusher that cannot be avoided:
1. The quality of the sand produced by impact crusher is not as good as that of a professional sand making machine.
2. Impact crusher for sand making requires a large amount of recycled materials, which will greatly affect the output.
3. The cost of the blow hammer is relatively high, and the wear of the blow hammer caused by the impact crusher for sand making is more serious, and the subsequent maintenance cost is relatively high.
Therefore, if your production scale is not large and the stone itself is not too hard, it is also possible to use imapct crusher to make sand, which can reduce investment costs. Conversely, if your production scale is large and the stone is relatively hard, it is more cost-effective to use sand making machine to make sand. Perhaps the short-term investment will increase, but in the long run, you will reduce the production costs and profits obtained are still very considerable. Kefid produces a complete range of impact crushers, including traditional PCL vertical shaft impact crushers, VSI and new 5X series sand making machines.